There are many precautions when using the grinding mill. One of them is the regulations on the running time of the machine. Generally speaking, the grinding mill cannot be operated for a long time without shutting down. It needs to be shut down after working for a period of time. Otherwise, it will cause great damage to the equipment. Xingaonai will analyze the hazards of the grinding mill running for a long time without shutting down.
1. Temperature increase
The grinding mill will generate heat when working. If it is not shut down for a long time, the temperature of the equipment will gradually increase. This will cause the metal material inside the equipment to change, thereby affecting the stability of the equipment, and then affecting the service life and production effect of the equipment.
2. Equipment deformation
The grinding mill may change the shape of the equipment under strong pressure. The compressive strength of the internal accessories of the equipment is limited. If it is not shut down for a long time, deformation may occur, which will affect the normal operation of the equipment. If the deformation is serious, the equipment may not be able to work, and the accessories will break under pressure, which will cause irreparable damage to the equipment.
3. Efficiency reduction
If the grinding mill is not shut down for a long time, not only will overwork occur, but the production efficiency and performance of the equipment will also decrease. In general, equipment, like us, needs to rest after long-term work, otherwise not only will the work efficiency be low, but the service life will also be reduced.
There are some things to pay attention to when using the grinding mill, one of which is that the equipment cannot be left unattended for a long time. In order to ensure the normal operation of the equipment and extend the service life of the equipment, we need to regularly maintain and service the equipment. At the same time, in order to improve the working efficiency of the equipment, we also need to reasonably arrange the working time and rest time of the equipment to keep the equipment in good condition during work.