With the coming of winter, the weather is getting colder. Raymond mills usually work outdoors, where the temperature is low. In order to ensure the normal operation of the equipment and extend its service life, it is particularly important to do a good job of winter maintenance.

First of all, in cold weather, the lubrication system of the equipment is easily affected. Therefore, special attention should be paid to the lubrication system of the Raymond mill. Before starting the machine, the equipment needs to be preheated to allow the lubricating oil to fully lubricate all parts before starting the feeding work. This can help reduce the wear of the equipment and keep the equipment running in good condition.
Secondly, when the temperature is low, the engine oil and lubricating oil in the variable temperature box need to be replaced with low-temperature antifreeze lubricating oil to avoid the lubricating oil being frozen due to the low temperature, thereby damaging the equipment. In addition, it is also necessary to check the oil level of the reducer, the looseness of the V-belt, the wear degree of the gears and other key parts to ensure the normal operation of the machine. Once any abnormality is found, it is necessary to replace the damaged accessories and add lubricants in time.
In addition, regular maintenance is also required for key parts such as the electromechanical part and the transmission part. For example, it is necessary to regularly check whether the pump has oil and whether the screws are loose, and also check whether there is oil in the mixer reducer and whether the screws are loose. For parts such as the transmission chain and dehydrator bearings, butter needs to be added once a month; and for the bearings of the central shaft, butter needs to be added once every three months. The slider part needs to be oiled once a week to avoid rust.
In addition to the maintenance of the equipment, the skills and experience of the operator are also closely related to the normal operation of the equipment. Although the operation of the Raymond mill is relatively simple, once an emergency occurs, inexperienced people may not be able to handle it correctly, which may cause danger and safety hazards. Therefore, operators need to undergo professional training, master relevant knowledge and be qualified before they can operate the Raymond mill.
In short, the winter maintenance of the Raymond mill is very critical. By taking appropriate maintenance measures and maintenance methods, the normal operation of the equipment can be ensured and the service life can be extended. At the same time, it is also very important to select operators with relevant skills and experience.